Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3

Original type rubber brakeline with chunky galvanized ends

 This part is due back in stock soon, call 01484 841395 to reserve yours

17657550

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

 This part is available by special order, request a quote

 18257551 GU18257551 18 25 75 51
 1825 7551 1825.7551 18.25.75.51

Complete drilled fully floating disc for front left or front right hand side

Also known as Guzzi ref 30613660, 30613760. Always fit new brake pads when replacing a brake disc - BRA54724 .

 This part is due back in stock soon, call 01484 841395 to reserve yours

 30613660 GU30613660 30 61 36 60
 3061 3660 3061.3660 30.61.36.60

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs.
No longer available - superceded by BRA14901

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338.

See BRA14102 for alternative aluminium cap

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Rear dished cast brake disc, black centre, 6 hole

Also fits Le Mans 1, Le Mans 2, Le Mans 3. A quality Italian sourced spare

Always fit new brake pads when replacing a brake disc - see BRA54724. Needs 6 x BRA98445

 This part is due back in stock soon, call 01484 841395 to reserve yours

18635760-z 18635760 GU18635760 18 63 57 60
 1863 5760 1863.5760 18.63.57.60

Adjustable front black brake lever for PS 11, PS 13 and PS 16 rectangular master cylinder.

Also known as Guzzi ref. 28605678. See BRA01630 or BRA01640 for a span adjustable alternative and HAA10850 for lever pivot pin

 This part is due back in stock soon, call 01484 841395 to reserve yours

10270640-z 10270640 GU10270640 10 27 06 40
 1027 0640 1027.0640 10.27.06.40

Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part

Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28613345 GU28613345 28 61 33 45
 2861 3345 2861.3345 28.61.33.45

Also fits Benelli Sei

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota